Tunnel Culvert Concrete Gunite Machine 6m3/H Shotcrete Sprayer
Product Details
Tunnel Culvert Concrete Gunite Machine
,6m3/H Shotcrete Sprayer
,Concrete Gunite Machine 6m3/H
Dry Mix Electric Driven Gunite Machine Advanced Technology for tunnel culvert
Gunite Machine
Prepare for startup Gunite Machine:
1. Check the connection of each line of the electronic control system is firm and there is no leakage phenomenon.
2. Observe the oil mark and check whether the lubricating oil in the reducer is sufficient.
3. Check whether the fastening of all parts of the machine is correct and reliable.
| Technical | Parameters | ||||
| Model | PZ-5 | PZ-6 | PZ-6F | PZ-7 | PZ-9/WSP |
| Throughput(m3/h) | 5-5.5 | 6 | 6-7 | 7 | 9 |
| Transport Distance (Tidal Spray) (m) | 200 | 200 | 200 | 200 | 200 |
| Applicable Material (Cement/Sandstone) Ratio | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 |
| Applicable Material (Water/Ash) Ratio | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 |
| Aggregate size (mm) | φ20 | φ20 | φ20 | φ20 | φ20 |
| Working Pressure (MPa) | 0.2～0.4 | 0.2～0.4 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 |
| Feeding height (m) | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
| Rotor speed (r/min) | 11 | 11 | 11 | 11 | 11 |
| Motor Power (KW) | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 |
| Motor speed (r/min) | 960 | 960 | 960 | 960 | 960 |
Operation Method of Gunite Machine:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.
-
Orange ISO Cement Grout Pump Rational High Pressure Grouting Pump
Advanced Technology Rational Structure High Pressure Grouting Machine Universal High Pressure Grouting Machine Characteristics of High Pressure Grouting Machine: High pressure grouting machine is composed of main pump, belt gear system, seat, safety stop valve, motor (diesel engine) and special ... -
Green Gypsum Mortar Grout Pump 12 M3/H Floor Heating Backfill
high Power Hydraulic type Gypsum Mortar Pump floor heating backfill Gypsum Mortar Pump Application of Gypsum Mortar Pump: 1. In construction engineering: horizontal and vertical conveying mortar or large area coating; 2. In chemical sector and transport pulp in the pulp and paper industry raw ... -
SGS Mobile Concrete Pump Mini Concrete Pump Machine For Swimming Pool
Portable Design Environmental Mobile Concrete Pump for swimming pool Mobile Concrete Pump PLC automatic control system of Mobile Concrete Pump: The core components of the electrical part is PLC chip, some important electrical components using imported brands, contactors, relays and button switches ... -
Air Driven Concrete Spraying Machine 6m3/H Underground Shotcrete Sprayer
tunnel subway use air driven Concrete Spraying Machine long service life Concrete Spraying Machine Maintenance of Concrete Spraying Machine: 1. Anti-stick cavity and discharging elbow with anti-stick function, generally will not bond at work, but after the end of each shift should open the rotor, ...
