Customized 7.5Kw Mortar And Grout Mixer Pump Low Energy Consumption

Electric Driven low Energy consumption Mortar And Grout Mixer customized

Mortar And Grout Mixer

Description of Mortar And Grout Mixer:

1. Before starting, the application of hand rotation to check whether the moving parts are stuck, check whether the electrical appliances, circuit damage, grounding wire is connected, and then the power idling, check whether the machine has abnormal sound, turning is correct (according to the direction shown by the arrow).
2. When using the equipment, the machine should be turned on first, then add water, and then feed.
3. The user shall add water from the inlet to the required height according to the required water-cement ratio.
4. Start the main motor and add the powder evenly according to the specified quantity. After all the powder is added, delay for about one minute.

Parameters of Mortar And Grout Mixer:

Structure and working principle of Mortar And Grout Mixer:

Mortar And Grout Mixer is driven by a vertical motor, and is fixed on the support frame of the cantilever structure by the bearing seat and the main shaft through the key connection. The blades are serrated and have large shearing force, which can generate irregular strong eddy currents. At the same time, they can tear and smash solid fluids for high-dispersion mixing. The circulating pump of the shaft is forced to send the slurry, and the slurry in the barrel is quickly and uniformly circulated by the pump, and the pulping speed is fast, which takes less than two minutes. Not only the pulping time is fast, but also the prepared pulp is uniform and sufficient, and there is no agglomeration and fish-eye effect, so it is especially suitable for making high-concentration pulp.