Grey Scrap Shear Machine 3500mm Sheet Metal Guillotine Machine

Heavy Metal Scrap Gantry Shear Iron Cutting Machines Hydraulic Guillotine Shears:

Gantry type heavy shearing machine is used for shearing of various metal sheets, and it is an ideal machinery for charging process in rolling mills, non-ferrous metal plants and smelters. 

1. Size of press box is widen and expand which facilitate the addition of all kinds of scrap materials, and improve the treatment efficiency of scrap steel;
2, the control system adopts the international brand ,such as Siemens, Mitsubishi. Automatic control , optional wireless remote control device;
3. Automatic lubrication system and self-monitoring of lubrication process;
4. The cooling system adopts the compressor cooling mode, which occupies a small area and has a good cooling effect.

Gantry Shear It consists of frame, hydraulic cylinder, hydraulic power system, electrical system and other components. In principle, it works by automatically loading the material box, that is, after the material is grabbed to the material box, the waste material is automatically sent to the knife-edge scissors by the conveyor belt. The application of this machine solves the problem of crushing and regeneration of large heavy waste charge. It is widely used in rolling mills, metallurgical plants, and waste steel treatment and recovery units. It is an effective equipment for metallurgical charge treatment and profile cutting.

Whole guarantee period is 12 months. It's one kind of equipment suitable for cutting heavy steel scraps. The gantry type shears produced by our company have a tonnage of 315-3000 tons. The width of the shearing port is 600-2000mm, which is suitable for light steel and steel , Steel plate, nickel plate, steel plate, round steel, steel pipe, copper scrap, steel scrap, iron scrap, light metal structural parts, stainless steel, metal briquetting, car body, aluminum alloy, copper, iron filings, steel wire, automobile, metal pressing The crushing and processing of heavy waste and entangled materials that cannot be processed by scrap steel crushing equipment such as blocks. This series of equipment uses a new electro-hydraulic control system and an enhanced oil cylinder. Its working efficiency can reach 3-6 times/min according to the model. The cutting speed can be adjusted by the speed-regulating motor. Side squeezing cylinders are installed on both sides of the bin. If large scraps such as scrapped cars cannot be cut through the gantry shear, the scraps can be squeezed and reduced through the side squeezing cylinders, and then sent to the cutting knife to be cut off through the conveying table.

Parameter of gantry scrap shear machine:

Pictures of gantry scrap shear machine: