Vertical Manual Cement Grouting Pump 5Mpa Hand Operated Grout Pump
Product Details
Vertical Hand Operated Cement Grouting Pump
,Vertical Manual Cement Grouting Pump
,5Mpa Hand Operated Grout Pump
Widely Used Vertical Structure Manual Grout Pump For Sale Flow Stability
Manual Grout Pump For Sale
Removal of Vulnerable Parts of Manual Grout Pump For Sale:
1. Piston: first remove the cylinder head pressing nut, loosen the cylinder liner inner pull rod crown nut, flat nut and pressing plate, and then use the piston disassembly tool to screw into the piston seat, hammer back and forth impact the piston out.
2. Cylinder liner: first remove the pump head, remove the piston, and then remove the cylinder liner.
3. Seat: remove the valve cover and remove the seat with the valve seat tool.
4. Pull rod seal ring: after the cylinder liner is removed, loosen the connection between the pull rod and the crosshead, remove the pull rod, and then open the gland on the pull rod seal to replace the pull rod seal ring.
Technical Parameters of Manual Grout Pump For Sale:
| Cylinder number | 1 |
| Bore diameter | 80mm |
| Piston stroke | 90mm |
| Diameter of suction pipe | 51mm |
| Diameter of outlet pipe | 32mm |
| Motor power | 5.5 kw |
| Main shaft speed | 1440 r/min |
| Working pressure | 5 Mpa |
Structure of Manual Grout Pump For Sale:
Cement pressure grouting machine is mainly composed of pump body, pump frame, air chamber, shock-resistant pressure gauge, motor, V-belt and pulley cover.
The installation foundation of cement grouting pump should be smooth and not inclined.
The pump is fixed on the foundation with the foot screw to prevent the vibration of the pump during operation.
Preparations before pumping of Manual Grout Pump For Sale:
After the pump has been stopped or reinstalled for a long time, the following preparations must be made before starting.
1. Check whether there is enough lubricating oil in each part.
2. Check whether the suction pipe of the filter is unblocked.
3. Check whether there is obstruction in the movement of each part.
4. Check the accuracy and reliability of the transmission mechanism.
5. Check the looseness of fasteners, especially the screw tightening of rubber piston locking nut, cross head and piston rod connection thread.
6. Check the suction height of the pump. The maximum suction height of the pump should not exceed 2.5 meters in areas below 1000 meters above sea level. In areas above 1000 meters above sea level, the suction height of the pump should be reduced according to the local atmospheric pressure reduction.
7.Check the position of the filter immersed in the mud tank. Generally, the mud level should be below 0.3-0.5 meters, and the filter should be no less than 0.5 meters away from the bottom of the mud tank.
Pictures of Manual Grout Pump For Sale:
-
Orange ISO Cement Grout Pump Rational High Pressure Grouting Pump
Advanced Technology Rational Structure High Pressure Grouting Machine Universal High Pressure Grouting Machine Characteristics of High Pressure Grouting Machine: High pressure grouting machine is composed of main pump, belt gear system, seat, safety stop valve, motor (diesel engine) and special ... -
Green Gypsum Mortar Grout Pump 12 M3/H Floor Heating Backfill
high Power Hydraulic type Gypsum Mortar Pump floor heating backfill Gypsum Mortar Pump Application of Gypsum Mortar Pump: 1. In construction engineering: horizontal and vertical conveying mortar or large area coating; 2. In chemical sector and transport pulp in the pulp and paper industry raw ... -
SGS Mobile Concrete Pump Mini Concrete Pump Machine For Swimming Pool
Portable Design Environmental Mobile Concrete Pump for swimming pool Mobile Concrete Pump PLC automatic control system of Mobile Concrete Pump: The core components of the electrical part is PLC chip, some important electrical components using imported brands, contactors, relays and button switches ... -
Air Driven Concrete Spraying Machine 6m3/H Underground Shotcrete Sprayer
tunnel subway use air driven Concrete Spraying Machine long service life Concrete Spraying Machine Maintenance of Concrete Spraying Machine: 1. Anti-stick cavity and discharging elbow with anti-stick function, generally will not bond at work, but after the end of each shift should open the rotor, ...
