Pneumatic 7.5KW Dry Mix Shotcrete Machine Electric Power CE ISO
Product Details
Pneumatic Dry Mix Shotcrete Machine
,7.5KW Dry Mix Shotcrete Machine
,CE ISO shotcrete concrete machine
Electric power pneumatic driven Shotcrete Equipment For Sale light weight
Shotcrete Equipment For Sale
Stop spraying of Shotcrete Equipment For Sale:
1. Stop the machine and blow out the excess material in the conveying pipeline.
2. When the pipeline is clean and no material is ejected from the nozzle, close the water valve at the nozzle.
3. Finally, close the total air duct valve.
4. The mixing material can be retained in the hopper when the injection operation is interrupted briefly.
5. At the end of a long pause or shotcrete operation, stop feeding, let the machine continue to operate, until the hopper and the residual material in the rotor is finished, and at the same time to add a little wet sand to the hopper and the residual material in the rotor cavity cleaning spray out.
Parameters of Shotcrete Equipment For Sale:
| Technical | Parameters | ||||
| Model | PZ-5 | PZ-6 | PZ-6F | PZ-7 | PZ-9/WSP |
| Throughput(m3/h) | 5-5.5 | 6 | 6-7 | 7 | 9 |
| Transport Distance (Tidal Spray) (m) | 200 | 200 | 200 | 200 | 200 |
| Applicable Material (Cement/Sandstone) Ratio | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 |
| Applicable Material (Water/Ash) Ratio | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 |
| Aggregate size (mm) | φ20 | φ20 | φ20 | φ20 | φ20 |
| Working Pressure (MPa) | 0.2～0.4 | 0.2～0.4 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 |
| Feeding height (m) | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
| Rotor speed (r/min) | 11 | 11 | 11 | 11 | 11 |
| Motor Power (KW) | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 |
| Motor speed (r/min) | 960 | 960 | 960 | 960 | 960 |
Operation Method of Shotcrete Equipment For Sale:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.
Pictures of Shotcrete Equipment For Sale:
Construction Site and Warehouse of Gunite Concrete Machine:
-
Orange ISO Cement Grout Pump Rational High Pressure Grouting Pump
Advanced Technology Rational Structure High Pressure Grouting Machine Universal High Pressure Grouting Machine Characteristics of High Pressure Grouting Machine: High pressure grouting machine is composed of main pump, belt gear system, seat, safety stop valve, motor (diesel engine) and special ... -
Green Gypsum Mortar Grout Pump 12 M3/H Floor Heating Backfill
high Power Hydraulic type Gypsum Mortar Pump floor heating backfill Gypsum Mortar Pump Application of Gypsum Mortar Pump: 1. In construction engineering: horizontal and vertical conveying mortar or large area coating; 2. In chemical sector and transport pulp in the pulp and paper industry raw ... -
SGS Mobile Concrete Pump Mini Concrete Pump Machine For Swimming Pool
Portable Design Environmental Mobile Concrete Pump for swimming pool Mobile Concrete Pump PLC automatic control system of Mobile Concrete Pump: The core components of the electrical part is PLC chip, some important electrical components using imported brands, contactors, relays and button switches ... -
Air Driven Concrete Spraying Machine 6m3/H Underground Shotcrete Sprayer
tunnel subway use air driven Concrete Spraying Machine long service life Concrete Spraying Machine Maintenance of Concrete Spraying Machine: 1. Anti-stick cavity and discharging elbow with anti-stick function, generally will not bond at work, but after the end of each shift should open the rotor, ...
